Merry Christmas Cardinals

The August challenge at Christmas Card Throwdown is to make a fractured card. Usually (at least from what I can tell), the strips on this card design are solid cardstock with patterned paper in the background. I wanted to do things a little differently, so I pulled out some old-ish cardinal washi tape that I got a few years ago at Paper Source. Because it's translucent & I wanted it to stand out a bit, I adhered lengths of the washi to a couple of scraps of white cardstock & trimmed the cardstock to the same width as the tape.

 

 

 

At first I was thinking of using solid cardstock for my background, & maybe having each section be a different color. I also considered using an embossing folder to add texture. Because the washi tape is about 9/16" wide, I needed a larger card to implement my idea. So I went with a 5x7" card. This ruled out a lot of my smaller (~A2 size) embossing folders. And the multi-color approach just seemed a bit too fussy. So I decided to stamp a subtle background with the "Holly's Snowflakes" set from Mama Elephant (discontinued). (I just couldn't leave the background too plain! 😆)The grey branches against the white background in the washi design inspired me to stamp with white pigment ink onto a light grey cardstock, for kind of a reverse effect. The white ink kept the stamping subtle while still adding a little interest.

 

For the focal image, I chose the single cardinal from Hero Arts' "Holiday Cardinal" stamp set. I stamped it on a scrap of Strathmore smooth bristol paper with Versafine Clair Nocturne ink & heat embossed with clear powder. Originally, I die cut that with a Waffle Flower "Additional Squares" die & painted the bird with my Zig Clean Color Real Brush markers. However, I couldn't come up with anything for the bird to stand on, & I didn't want him just "floating" on a white background. So I thought of having him stand on a greeting strip. But short of cutting around just his feet with a craft knife & slipping a strip into that slit, I couldn't figure out how to accomplish that. So I ended up die cutting him with the coordinating die so I could easily tuck the strip underneath his feet.

 

I stamped the greeting, also from "Holiday Cardinal," onto a scrap of white cardstock, & cut it into a banner. I glued that onto another layer of cardstock, to make it a little sturdier, then cut around it.

 

I die cut another square for my diamond from a scrap of blue parchment paper. I adhered that to my card front, centered side-to-side but a little up from the horizontal center of the card. I adhered my washi tape strips around the diamond, cutting the ends around the edges as I went. Finally, I glued down my greeting strip & glued the bird "standing" on top of that. Even with the journey this card became, I am in love with the final result! I'm sure the recipient will love it as well.

 

I'm also entering my card in the following challenges:

 

Simon Says Stamp's Wednesday Challenge: "Stamp It"

613 Avenue Create's August Challenge: "Anything Goes" (not playing the optional twist)

Critter Crazy Challenge #114: "Anything Goes with a Featured Critter"

Allsorts Challenge #857: "All Creatures Great & Small"

The Paper Funday Challenge #91: "Anything Goes" (not playing the optional twist) 

Around the World

 

The optional topping for Seize the Birthday's Challenge #331 is to make a square card with a non-white base. I needed a card for my brother's 50th birthday, & found the perfect graphic that works with a square format. He is a pilot & also loves to travel, so it seemed serendipitous when I found the image of a plane going around a globe. Jules Verne's novel, "Around the World in 80 Days," inspired the first part of the greeting.

 

 

 

I had to google how many days my brother has actually been alive. What did we ever do before online search engines???

 

I opened the main image, from Magnific.com, in Photoshop. The globe in the image didn't work with my vision, so I found another one at PNGFind.com of a globe where the landmasses were outlined instead of silhouetted. I selected the globe in the main image & deleted it, then moved the outline globe & positioned it where the original globe had been. I created a circle path to type the greeting on, & then entered the text. The bottom part of the greeting was a bit difficult, as I had forgotten how to reverse the text so it curved up like I wanted, but I eventually figured it out. I also reduced the opacity of the globe itself, so I wouldn't have black outlines when I colored. Since wax-based colored pencils kind of - but don't totally - obscure outlines on an image, I just didn't want to fight with that. Finally I printed my panel onto a piece of Strathmore Colored Pencil paper.

 

I colored the globe with my Prismacolor colored pencils. In traditional globe-coloring fashion, I colored the landmasses green & the water blue. But I decided to do Antartica & the North Pole area with a very pale blue. I mean, ice isn't green, is it? 😉 

 

I created my card base from a pale grey cardstock. I trimmed my main panel 1/4" shorter & narrower than my card base. I adhered that to a piece of teal cardstock & cut the mat so it was 1/16" larger on all sides. I did the same with a green mat, then adhered that to my card base. And that finished my card. The hardest parts were formatting the lower text to curve properly & keeping track of what was land & what was water when I was coloring. Not that the latter was hard, per se, but I did have to stay focused. I absolutely LOVE how this card turned out, & am happy to report that my brother loved it, too!

 

I'm also entering my card in Little Red Wagon's "One Thing" challenge. (I used one composite image.) 

He is Risen

I created this card for my mom to send to a priest at her church. Of course she wanted a religious-themed Easter card. I didn't have much in the way of religious Easter image or greeting stamps, so I purchased Trinity Stamps' "Simply Sentimental: Easter" stamp set & coordinating dies. While it's not a completely religious set, it does have words & phrases that are not necessarily cutesy in font style or context. I got the greeting for this card from that set.

 

My inspiration came from this card I saw on Pinterest. While it's not an Easter card, I liked the cross on a label-style background with an element in the middle of the cross. So I ran with that.

 

I die cut the strips for the cross from dark brown cardstock with one of the "Barn Wood Planks" dies from Honey Bee Stamps. Because I needed them to be narrower & shorter than the original die cut, I first glued the die cuts to another scrap of cardstock, then cut them with scissors to the sizes I needed. Because these dies cut deeply-debossed details into the cardstock, I had learned that if you want to trim them down at all, you have to adhere them to a solid backing piece first so they don't fall apart.

 

I used a Spellbinders "Labels Four" die (discontinued) for the panel to put the cross on. I die cut that from white cardstock, & inked the edges with blue ink to help it stand out a little. I glued the cross pieces in place, making sure they were centered & parallel to the sides and the top & bottom as needed.

 

For the single dogwood flower, I opened the "Dogwood Branch" digi image from Fred, She Said in Photoshop. I used the eraser tool combined with the marquee tool to erase the rest of the image, then sized the flower & printed it onto a scrap of Strathmore vellum bristol paper. I added shading & details with my Prismacolor colored pencils, then fussy cut the flower. I glued it where the cross pieces overlap.

I die cut the elements for the greeting banner from the "Banners & Tails" set (discontinued) from Impression Obsession. After inking them lightly with the same blue ink I'd used on the label, I stamped the greeting with Ground Espresso Distress Oxide ink onto the banner.

 

I had created my background during Juliana Michaels' "Stretch Your Stamps" online class several weeks ago. It's been sitting on my desk since then. I decided it would be perfect for this card, since it has kind of a masculine (or at least gender-neutral) look and wouldn't overwhelm the focal panel. I trimmed it down to 4x5-1/4", inked the edges, and adhered it to a white A2-size card base. I adhered my focal panel to that, & then added my greeting banner over the cross. I used a few pieces of scrap heavyweight cardstock behind the main part of the banner to pop it up, which also helped offset the slight thickness of the cross underneath it. I really love how this card came out!

 

I'm entering this card in Little Red Wagon's Challenge #853: "Easter Projects."

Birthday Blessings

The optional topping theme for Seize the Birthday's Challenge #319 is "Rainbow of Colors." I used this card that I had saved on one of my Pinterest boards as my inspiration. I don't have the exact same die that that creator used for their card, but I do have a few nested hearts die sets. I combined one of the "Nesting Hearts Infinity" dies by Hero Arts with an old My Favorite Things "Snow Drifts" die (discontinued) to create my version.

 

 

 

 

I began by die cutting the heart from Strathmore smooth bristol paper. I taped it from behind in the die cut negative to make handling it easier. I then ink blended with Candied Apple, Mustard Seed, Peacock Feathers, & Wilted Violet Distress inks. I had to use finger daubers due to the tight quarters I was ink blending in. I made sure to begin with the yellow, since that color tends to get "eaten up" by surrounding colors when I ink blend. Thankfully I was able to keep that from happening this time. 😊

 

After I finished ink blending, I removed the heart from the negative piece, then used one of the "Snow Drifts" dies to cut it into sections. So that the pieces would line up evenly around the perimeter of the overall shape, I had to die cut a sliver between each pair of sections, rather than just die cut the sections & spread them apart. So each time, I taped the die down & ran it through my die cutting machine. Then I carefully lined the die up on the lower piece of that pair so the "top" edge of the die was a hair away from the cut line, taped it down, & ran it through my machine again. This took about a 1/16" wide slice of the heart out. Not easy, but I succeeded! To give the heart sections a little dimension on the card, I glued each to scraps of heavyweight white cardstock & cut around them with my scissors. I made sure to slightly undercut the white cardstock so that it wouldn't stick out past the edges of each ink blended section. I repeated the process one more time, & called that part done.

 

I paired a "birthday" stamp from Simon Says Stamp's "It's Your Birthday!" set (discontinued) with the "blessings" from "Script Birthdays" (discontinued) by Sweet 'n Sassy Stamps (now Creative Worship). I stamped both in Versafine Clair Nocturne ink onto the front of my white A2 card base. Then I proceeded to smear black ink onto said card base, so I ended up restamping the greeting on a white panel.

 

I glued my heart sections to the panel. I began with the bottom-most piece so I could make sure not to cover my greeting with it. I was careful to space them correctly as I worked my way up to the top. The top piece was actually the most difficult to position & get the spacing even, for some reason. Thankfully I had kept the slivers I'd cut out, so I just placed that in between the top & second sections for spacing purposes. Before the glue on the top heart section dried, I used my tweezers to pull out the spacing sliver, lest it get glued in place.

 

The final step was to adhere my panel to an A2 card base. I used the same card I had smeared ink on, & just adhered the panel over that side of the card base. I just figure, waste not, want not! 😉

 

I'm also entering my card in the following challenges:

 

Simon Says Stamp Wednesday "Anything Goes"

613 Avenue Create February Challenge: "Anything Goes" (not playing the optional twist)

Sweet Greetings

As always for their first challenge of the month, Christmas Card Throwdown is having a sketch challenge. Because of the direction my gingerbread house, from Hero Arts' "Color Layering Gingerbread House" (discontinued), is facing, I flipped the sketch horizontally. I also added a greeting strip, but otherwise, I stayed true to the sketch.

 

 

I found the patterned paper I used on the background, from The Paper Studio's "Christmas Candyland" letter-size pad, in my scrap stash. I actually had enough of that piece for 2 layering panels, so I went ahead & made 2 cards.

 

I used my MISTI stamp positioning tool to help with stamping the gingerbread house, since there are 4 stamps to line up to build the whole image. I stamped the main part of the house with Memento Toffee Crunch ink followed by Memento Peanut Brittle ink to give it a more golden color. I used Ranger Geranium archival ink, Lawn Fawn Noble Fir, & Memento Cottage Ivy for the red & greens. Since there is no coordinating die, I penciled an outline around the edges of my image, about 1/16" away, & fussy cut it with my scissors.

 

I really struggled with how to add the house to the background so it would stand out. Because the patterned paper is so busy, I couldn't just stick my image down, as it would just get lost. I didn't want to use a cardstock mat, just because it took up a large chunk of the panel & I didn't like the look. I tried surrounding the house a little with tissue paper, both white & sprayed with a dark green Distress Mica Stain, but didn't like the look of either.

 

I finally remembered a trick I've used before with white acrylic craft paint. I placed the house where I wanted it on my panel, and lightly traced the outline with a pencil. Then I smeared the paint on that area with my finger, keeping the outline not too far from the edges of the house and very organic. That did the trick, & all I had to do then was glue the house in place!

 

Before gluing down the house, though, I wanted to add a greeting. So I stamped the Sweet Greetings phrase from the same set onto a scrap of white cardstock with Noble Fir ink. I cut that into a strip, & layered it so the right end went behind the roof of my gingerbread house. I finished the card off by adhering a burgundy mat to my white A2-size card base & mounting my patterned paper panel to that. I will send this & its companion card to Send a Smile 4 Kids. Hopefully it will bring a smile to a hospitalized child this holiday season!

 

I'm also entering my card in the following challenges:

 

Send a Smile 4 Kids: "Holiday Cards 4 Kids"

613 Avenue Create November Challenge: "Anything Goes" (not playing the optional twist) 

Birthday Mum

 

 The sketch for this week's Atlantic Hearts Sketch Challenge inspired the design of this card. I got my general color inspiration from palette #127 in Volume 1 (1st edition) of Sarah Renae Clark's Color Cube system.

 

 

 

I saw this card by Lin at her Hearts, Hugs, & Flowers blog, & liked the general floral arrangement. I don't have a sunflower die, but thought I could get a similar effect with some old layering flower punches by The Paper Studio I have. I punched one of each size from each of 3 different shades of yellow/orange cardstock. I glued together the 3 layers of each individual size, adding the glue only in the center & kind of fanning the petals apart as I glued the layers together. After the glue had set up, I added more glue to the center back of each of the 2 smaller layers & adhered them together, largest to smallest. While I liked the result, I felt it now looked more like a mum than a sunflower, so I decided to pivot & just go with that.

 

I cut some smaller flowers using dies from Scrapbook.com's "Sunny Lane Florals" set. I ended up not being able to make a good-looking arrangement with those & my mum, though, so I gave up on that. (I am keeping those flowers for some other project.) I did cut a flower center for my mum from my darkest shade of yellow-orange cardstock with one of the dies in that set, as the center of the flower looked a little stark without it.

 

For the stem, I used a branch die from Honey Bee Stamps' "Winter Greenery" set. I die cut it from green cardstock, & trimmed off most of the "branchy" parts from the main section with my scissors. Then I used double-sided tape to adhere the top end to the back of my flower. I added glue to reinforce the adhesion, and set that aside to dry.

 

I die cut 3 leaves from the "Skeleton Leaves" set by Tim Holtz. I adhered each to a different shade of cardstock, & then fussy cut around the perimeter, so I would have a solid backing to each leaf.

For my greeting, I first stamped one of the banners from Avery Elle's "Build a Banner" set (discontinued) onto white cardstock. I used Hero Arts Pool ink for the outline, Lawn Fawn Sunflower ink for the main background, & My Favorite Things Pineapple ink for the 2 bits where the ends fold under. Then I stamped the greeting, from the "Sentiment Strips: Birthday" set from Pretty Pink Posh in My Favorite Things Coral Crush ink. Finally, I die cut the banner with the coordinating die. I die cut 3 more banners from white cardstock, & layered them behind my greeting banner to give it a little more oomph.

To assemble the card, I cut a piece of blue gingham patterned paper from my scrap stash to 4-1/8 x 5-3/8". I laid out my elements until I liked the arrangement, then glued them in place. For the leaves, I added glue only to the base sections so the ends would kind of pop up around the flower. I added glue to the flower only in the center, & stuck that down on top of the leaves. I glued the stem all the way to the background, & trimmed off the bit that overhung at the bottom edge of the panel. I added my banner, & adhered my panel to a navy cardstock mat that I'd mounted to a white A2 card base. Once the glue dried, I zhuzhed the petals on the flower to fluff them up a bit, just for a bit of added dimension.

 

I'm also entering this card in the following challenges:

 

All Sorts Challenge #835: "Autumn Colors"

Simon Says Stamp's Monday Challenge: "Add Some Texture" (added texture with top layer of die cut leaves & fluffy mum)

Simon Says Stamp's Wednesday Challenge: "Anything Goes"

The Paper Funday Challenge #81: "Anything Goes" (not playing the optional twist)

Creative Knockouts Challenge #557: "Halloween or Fall" (used fall leaves & flower)

Ellibelle's Corner October Garden Party Challenge #8

Two Cards - One Hour

 

Christmas Card Throwdown's Technique challenge this week has been "Quick Card." Basically, make a card in 30 minutes or less. Sounds easy, right? Well, suffice it to say my first attempt went over the 30 minutes by about 25 minutes more. Thankfully, I was able to scale back & get not just one, but 2 cards that meet the time constraint!

 

For my first card, I pulled out an oldie but a goodie - "Lovely as a Tree" from Stampin' Up (sadly discontinued). I began by cutting a white cardstock panel to 7x5". I used yellow Frog Tape to mask off the edges, leaving a rectangle in the middle. Then I stamped one of the images with Simon Says Stamp's Mint Candy ink. I wanted a misty appearance, inspired by this card, & this light green fit the bill quite nicely.

 

Without removing the tape, I ink blended in the center rectangle with Bundled Sage. Cracked Pistachio, & Iced Spruce Distress inks. I added extra Iced Spruce around the edges to darken them slightly for a vignette effect. Then I carefully removed the tape, being sure not to peel any of the cardstock up.

 

I stamped the pine tree from the same set off to one side with Simon Says Stamp's Laurel Green ink. I actually stamped it twice (thank heavens for the MISTI!) to get a slightly darker impression. I stamped the greeting, from WPlus9's "Poinsettia Bouquets" (discontinued) in that same color. For the snow on & under the tree, I daubed embossing ink on with a Distress embossing pen, then sprinkled Hero Arts' White Puff embossing powder over that. I brushed off some of the powder, as I'd gotten a bit heavy-handed with the ink, then melted what remained with my heat gun. Finally, I adhered my panel to an A7 card base.

 

 The inspiration for my second card came from this card by Chari Moss. I liked the glittery greenery & the simple CAS design.

 

I die cut the greenery & berries, from the Essentials by Ellen "Poinsettia & Pine set (discontinued), from green & red glitter cardstocks. For the background, I pulled an A2-size cream cardstock panel from my pre-cut card fronts stash. I stamped the greeting, from the Essentials by Ellen "Mistletoe & Holly" set (discontinued) in Candied Apple Distress Oxide ink. Again, my MISTI came in clutch, since I had to stamp it a few times to get a good impression. I trimmed the panel down to 4x5-1/4", and matted it with a dark brown cardstock that I'd adhered to a white A2 card base. I glued my greenery & berries at the top of the panel. I added the glue only to the stems, so the die cuts kind of "hang" freely. Finally, I tied a triple bow from gold DMC Diamant thread & adhered it to the top of the greenery. I don't normally do something this "bare," but I really like how it came out!

 

I'm also entering my first card in The Paper Funday's October "Anything Goes" Challenge (not playing the optional twist).

Wishing You a Year of Joy

 

 

The theme for Double Trouble's challenge this time around is "Shades of Fall." As usual, it is a recipe challenge using at least the number of the following ingredients: 3 colors (shades of Fall), 2 images, 1 stenciled or dry-embossed element. As you notice, I have flowers on my card. Flowers (except maybe for mums) don't exactly scream Fall - unless you live in the South. Here in Texas, our flowers (including mums) bloom sometimes into November. Below is a photo I shot at a pumpkin display here in our town in October of 2023. The purple flowers in that display helped inspire my color palette for my images.

 

Pumpkin Wonderland

 

I began with my background. I had applied the molding paste to my panel, using the "Ribbon Weave" stencil from A Colorful Life Designs quite some time ago, & it's been sitting in my stash ever since. I decided it would work perfectly for this card. I placed the stencil back over the panel, lining it up with the molding paste design, & ink blended with Abandoned Coral, Dried Marigold, & Fossilized Amber Distress Oxide inks (my 3 shades). I decided to go with basically a pastel Fall color scheme, since the background is more of a supporting character to my main images.

 

I die cut my images from Strathmore Mixed Media paper, using the smaller flowers & leaves in the "Brushstroke Flowers #2" set from Sizzix/Tim Holtz. This is a new-to-me set, so I was glad to be able to use it. I used my DIY Distress Spray Stains (a la Tiffany Solorio) in Milled Lavender, Seedless Preserves, Mustard Seed, Shabby Shutters, & Rustic Wilderness to color scraps of the paper before die cutting. After I had die cut the flowers, leaves, & flower centers from the papers, I felt they still looked a little flat. So I got Tombow water-based markers in purple & green, and kind of flicked & tapped with the brush tip onto each main die cut. I also colored the layering pieces with the markers to make them darker. Then I spritzed all the pieces generously with water to get the marker color moving & dried them with my heat gun. That gave me the effect I wanted. After they were all thoroughly dry, I glued the layers for each piece together.

 

I stamped my greeting, from the "Sentiment Strips: Birthday" set from Pretty Pink Posh, in Abandoned Coral Distress Oxide ink onto white cardstock. Then I die cut that with one of the "Sentiment Strips" dies. I arranged my flowers & leaves & glued them together so I could work with them as one unit. After the glue dried, I positioned them & my greeting strip on the background panel & glued them down. Finally, I added my panel to a white A2 card base that I'd adhered a yellow mat layer to.

 

I'm also entering my card in the following challenges:

 

Die Cut Divas October Challenge: "Anything Goes"

Simon Says Stamp's Wednesday Challenge: "Clean & Simple"

613 Avenue Create October Challenge: "Anything Goes" (not playing the optional twist)

The Paper Funday Challenge: "Anything Goes" (not playing the optional twist)

All Sorts Challenge #835: "Autumn Colors"

Peace

 

This week's challenge at Christmas Card Throwdown is to use the colors teal & silver. Small amounts of black &/or white are allowed, but the primary colors need to be teal & silver.

I began by heat embossing the large background image from WPlus9's "Joyful Poinsettia" stamp set (discontinued) in silver onto a panel of white Hammermill 100 lb. cover weight cardstock. I love this particular cardstock for stamping and ink blending, as it is very smooth & not overly absorbent. Once I melted the embossing powder & let it cool for a few seconds, I ink blended over the entire panel with Salvaged Patina Distress ink. Then I went around the sides with Mermaid Lagoon Distress ink, not going all the way to the center so there would be a bit of a "glow" effect from the Salvaged Patina. Finally, to up the drama & contrast, I ink blended just around the edges with Uncharted Mariner, which is a deep teal blue color. I did a little more blending with Salvaged Patina, just to smooth the transitions among the 3 shades, & then wiped off any ink sitting on the embossing with a dry cloth.

I had a leftover peace die cut (made with a discontinued die from Winnie & Walter) sitting on my desk from a previous project It was white, but I thought it might work for a greeting if I die cut it from silver metallic cardstock. Not to let anything go to waste, I decided to layer the silver word with a couple of white die cuts, just for a bit more dimension. So I die cut the peace from Recollections Silver Foil cardstock & a scrap of white cardstock, & glued all 3 layers together.

To finish my card, I adhered my emboss-resist background panel to a white A2 top-fold card base. Then I glued the layered peace die cut on, centered on the panel. I considered adding some sequins or something, but decided to leave it as-is.

I'm also entering my card in the following challenges:

Paper Funday Challenge #80: "Anything Goes" (not playing the optional twist)

Die Cut Divas September challenge: "Anything Goes"

613 Avenue Create September challenge: "Anything Goes" (not playing the optional twist)

Happy Holidays Ornaments

This month's color challenge at Christmas Card Throwdown is "Baby Blue, White, & Light Brown." I had gotten the "Holiday Ornaments" stamp set by Pretty Pink Posh several months ago, & it's been lying on my desk ever since, waiting for me to use it. I thought this was the perfect occasion to break it out.

I decided to use Gansai Tambi Pearl Colors watercolors to paint the ornaments, just to give them a little extra pizzaz. I stamped them on Strathmore mixed media paper & painted them with the blue & white paints in the set. I had to water down the blue quite a bit to get it to the right value, but it worked out great in the end. After the paint dried, I noticed that parts of the white areas seemed a bit dingy when I looked at them at certain angles, so I went over those areas with another layer of the white pearlescent watercolor. That improved things. The problem might have been different thicknesses of the paint layers catching the light oddly. At any rate, after the paint had thoroughly dried, I fussy cut each ornament with my scissors & poked holes through the ornament hangers.

I die cut a panel of light kraft cardstock with one of the "Stitched Indented Rectangles" from Elizabeth Craft Designs (discontinued). After putting white metallic thread through the ornament hangers, I glued the ornaments in place on my panel. I folded the thread ends to the back of the panel & adhered them in place with double-sided tape. After the glue dried thoroughly, I heat embossed my greeting, from Honey Bee Stamps' "Pretty Poinsettias" stamp set (discontinued). Finally, I adhered my panel to a white A2 card base.

I'm also entering my card in the following challenges:

Ellibelle's Corner I Spy with My Little Eye Challenge: "Something to Celebrate"

Ellibelle's Corner Crafty Wednesday Challenge: "Anything Goes"

The Paper Funday Challenges #79: "Anything Goes" (not playing the twist)

Oh Holy Night

For this week at Christmas Card Throwdown, they have had a sketch challenge. I kept to the sketch pretty literally, but made a square card instead of rectangular.

I have not done Distress Oxide ink smooshing on photo paper for a long time. So I decided to do that for my background. I used a few blues & a purple, and applied the inks to my non-stick craft mat, 1 or 2 colors at a time. After I spritzed the ink with water, I smooshed my glossy photo paper face down into the puddles & droplets of ink. I repeated this process several times, drying the ink between layers with a hair dryer. By drying each layer of ink before adding more, you can layer the colors rather than having everything just mush together into one overall color.

After I had added several layers of ink, I dried it one last time. It always looks like a chalky hot mess at this point in the technique. To make the magic happen, I dampened a cloth with water & wiped it over the paper surface. That removes the chalkiness & reveals the beautiful colors that you built up. Once I had removed all the chalkiness, I set that aside to dry while I worked on the rest of my card.

I stamped the Magi silhouette image from Paper Smooches' "A Blessed Christmas" set (discontinued) onto white cardstock with clear embossing ink. I sprinkled on Stampendous Marcasite embossing powder & used my heat tool to melt that. I used a craft knife to cut out the few "inner" negative portions of the image, then fussy cut around the perimeter with my scissors. I then "painted" the edges of the cardstock with a dark grey marker, so the white cardstock core didn't show. For the ground, I added embossing ink to a 1/2" strip of cardstock, & heat embossed with more of the Marcasite powder.

To add some interest to my background panel, I splattered some White Gold shimmery watercolor from the Gansai Tambi Starry Colors set over the paper. I dried that with my hair dryer, & then glued the heat embossed pieces to the panel. I stamped my greeting, from the same set as the image, with Cotton White StazOn ink.

I cut 2 triangles from a scrap of silver handmade paper from my stash. I adhered those to the corners of a panel of teal cardstock that I'd mounted to a 4-1/4" square card base, & then adhered my main panel on top.

I am also entering this card in the following challenges:

Ellibelle's Corner Crafty Wednesday August Challenge: "Anything Goes"

Paper Funday Challenges #68: "Anything Goes"

Have an Ex-STRAW-dinary Birthday

The theme for the current Stay Crafty with a Blog Named Hero challenge is "Happy Anniversary." (Birthday-themed cards are also allowed.) I needed a birthday card for a friend of mine. She loves gardening, so I thought the "Strawberries Line Art" stamp set by Hero Arts would be perfect. I think she'll also get a kick out of the greeting!

I used Sketch #SC939 from Splitcoaststampers.com to guide the design for my card. I began by die cutting a circle from 140 lb. watercolor paper, then measured & cut off a portion, as per the sketch. I temporarily adhered the semi-circle onto my card background to make it easier to stamp on, & used my MISTI stamp positioner to stamp the image. While I had the image adhered to the navy panel, I went ahead & heat embossed the greeting, from the same stamp set, with Simon Says Stamp Antique Gold embossing powder. Finally, I removed the watercolor paper from my background, painted the strawberries with my watercolors, & used a white gel pen to highlight the seeds.

I adhered the image panel permanently to the background. I added a length of red-&-white checked ribbon as indicated in the sketch. For the 3 dots in the upper left corner, I punched circles from a scrap of white cardstock & glued them to my panel as a guide. I made a puddle of glue over each circle, then sprinkled on more Antique Gold embossing powder. After I let the glue dry, I melted the powder with my heat gun. To finish the card, I mounted the panel to a white A2-size card base.

I'm also entering my card in the following challenges:

Ellibelle's Corner/Ellibelle's Crafty Wednesday: "Anything Goes" (in conjunction with Double Trouble)

Double Trouble Challenge #165: "SomeThing, AnyThing, EveryThing"

Happy Bird-day

This is my second card for Lawn Fawnatics' current color challenge. I was able to use leftover leaf die cuts from my first card I made for this challenge, which were actually the inspiration for the design of this card.

I used the center panel from my die cut frame for my first card for the background on this one. I ink blended a sky with Salvaged Patina Distress ink. I also die cut a scrap of yellow cardstock with the same "Small Stitched Rectangle" die that I'd used for the background, so it would be the same width & carry the stitching detail on down. I cut the top edge of that piece with one of the "Stitched Hillside Borders" dies.

I stamped the images, from Lawn Fawn's "Special Delivery" & "Special Delivery Box Add-on," onto Strathmore Vellum Bristol paper. I used my Prismacolor pencils to color them, then cut them with the coordinating dies. I ink blended over the top of the strings die cut with Salvaged Patina, so it would blend into the sky. After I glued the strings to the box, I used a black marker to draw the ribbon & box lines across the strings die cut, then colored over the white edges with the same pencils as I'd used on the box.

I wanted to put the greeting in a speech bubble, but didn't have one that was the right size. I stamped the greeting on white cardstock, & then die cut it with one of the coordinating dies for "A Birdie Told Me." I made sure to place the die so the right side was close to that side of the greeting. Then I shifted the die cut in the die, & ran it through my machine again to make the speech bubble shorter. I misjudged the die placement the second time, so the greeting was off-center. But I just stamped the little heart from "Special Delivery" to fill in the space.

I glued my leaves along the bottom of the panel, & then glued my images in place. After I trimmed off the overhanging bits of the leaves, I adhered my panel to a cream mat that I'd mounted to a white card base. I will send this card to Send a Smile 4 Kids, to help a hospitalized child celebrate their birthday.

I'm also entering this card in the following challenges:

Simon Says Stamp Monday challenge: "Take Flight"

Simon Says Stamp Wednesday challenge: "Make It Cute"

Creative Knockouts Challenge #502: "Anything Goes"

The Paper Funday Challenge #57: "Anything Goes" (not playing the optional twist)

613 Avenue Create: "Anything Goes"

Die Cut Divas: "Anything Goes"

I Be-leaf in You

Lawn Fawnatics is having a color challenge at their blog. I don't have most of the ink colors they suggested as matches, but chose some Distress inks that looked pretty close. I got the inspiration for my design from this card I found on the Lawn Fawn website. I created this card to send to Send a Smile 4 Kids, hopefully to cheer up a hospitalized child.

For the background, I cut a panel of 140 lb. watercolor paper. I used Picked Raspberry, Seedless Preserves, & Evergreen Bough Distress inks to ink smoosh on my panel. Once I had covered the background with color, I felt it was a little too bold for what I wanted. So I squeezed a little white acrylic craft paint on my non-stick mat, thinned it with a bit of water, & smeared it onto my paper with my finger. I wanted just a little more color, though, so when the paint layer dried, I ink smooshed a bit more Evergreen Bough onto the panel. I dried it with my heat tool, then set it aside while I worked on the other elements for my card.

I die cut several leaves from watercolor paper, using the "Stitched Leaves" & "Small Stitched Leaves" sets from Lawn Fawn. I ink smooshed them with the same colors as the background, adding in Fossilized Amber & Shabby Shutters Distress inks. The Shabby Shutters came out a bit too pale, so I smooshed those a second time with Mowed Lawn ink. I did 2-3 colors on each leaf, just for interest.

I stamped my images, from Lawn Fawn's "You Autumn Know" stamp set, onto Strathmore Vellum Bristol paper. I used my Prismacolor pencils to color them, then die cut them with the coordinating dies. I also cut a few more plain die cuts for each image, then stacked them behind my images. This gives them some dimension so they stand out a bit from the background.

I glued my leaves around my background, as in the inspiration card, & cut off the bits that overhung the edges. For the frame, I used the largest of Lawn Fawn's "Large Stitched Rectangle" & "Small Stitched Rectangle" die sets. I nested the smaller inside the larger, and ran them through my die cutting machine with white cardstock. I added a few cardstock strips behind the sides of my frame to beef it up a bit, then adhered it to my card. I glued my images in place, overlapping the frame slightly. I stamped the greetings onto white cardstock. I don't have any banner dies to cut on that particular curve, so I penciled an outline around each & cut them out with scissors. I went over the eyes of the mouse on the leaf with a black glaze pen to help them pop, glued my banners in place, & that finished this card.

I'm also entering this card in the following challenges:

Creative Knockouts Challenge #502: "Anything Goes"

The Paper Funday Challenges #57: "Anything Goes" (not playing the optional twist)

Die Cut Divas September challenge: "Anything Goes"

Send a Smile 4 Kids September challenge: "Cute Fall/Halloween Cards 4 Kids"

Cozy Christmas Card

The Fall | Winter Coffee Lover's Blog Hop inspired the theme of this card. I used one of the coffee cups from Sweet 'n Sassy Stamps' "Holiday Cheer" digital stamp set for the focal image. The design is based on Sketch #SC571 at Splitcoaststampers.com.

I sized the cup image in Photoshop, then printed it onto a panel of Canson Montval 140 lb. watercolor paper. I used my watercolors to paint it, and fussy-cut it out.

I used my We R Memory Keepers Frame punch board to create the frame for the image from white cardstock scraps. The watercolor paper I used for the cup has a bit of thickness to it, & I didn't want it to stick above the surrounding frame. I made a few frames, all the same size, so I could stack them for dimension. I did have to trim a bit from all but the topmost frame, just so their edges wouldn't stick out at all from behind. After I had cut all the frames, I stamped my greeting - from Hero Arts' "Cozy Penguin" set - onto the bottom of the front frame. Then I glued all my frames together.

I cut a backing layer from scrap cardstock the same size as the outer perimeter of the frames, & adhered 2 pieces of patterned paper from my scrap stash to that, positioned so they would show through the window in the stacked frames. (I wanted a countertop & wallpaper look.) I glued my frames on top, & glued down my coffee cup, so it appears to "sit" on the counter. I adhered a panel of patterned paper from graphic45's "Christmas Carol" 6x6" pad to a white A2 card base for my background, & then glued my framed image onto the card.

I'm also entering this card in Double Trouble's Challenge #125A: "Deja-BREW."

Season's Greetings

This week's challenge at Christmas Card Throwdown is to use the colors blue, red, & white on your card. Other than black, those are the only colors you can use. I created this card, inspired by that challenge & Kristina Werner's lesson on Day 2 of Online Card Classes' "Holiday Card Workshop 2022."

I stamped the plaid design with My Favorite Things' "Plaid Background Builder" set (discontinued) & Candied Apple Distress Oxide ink onto a panel of Bazzill Icy Mint (pale blue) cardstock. Then I adhered that to my white A2 size card base.

For the snowflake, I used Hero Arts' "Color Layering Snowflake." I stamped the first layer with Hero Arts Cornflower ink, & the second with Lawn Fawn Forget-Me-Not ink. For the third layer, I used Ranger White Super Fine Detail embossing powder. I kind of wish (in hindsight) that I'd used a dark blue embossing powder instead of white, but I still think it looks OK. I just feel the dark blue would have popped more. Next time! :)

I stamped the greeting, from Hero Arts' "Finch Greetings," onto white cardstock with Forget-Me-Not ink, & fussy cut it out.

I laid the snowflake & greeting onto my background, & just felt the card needed a bit more. So I got some white holographic sewing thread & made a messy nest to put behind the snowflake. I used my ATG adhesive on the back of the snowflake to tack down the thread. Then I glued that to my card with liquid glue, just so it would hold very well over the Oxide ink. I glued my greeting down, centered below the snowflake, & that finished this card.

Peaceful

The current challenge at Christmas Card Throwdown is a sketch. I followed the sketch pretty much literally, except to extend the strips across the entire panel.

I got the inspiration for the background from Koren Wiskman's lesson on Day 7 of Online Card Classes' "Holiday Card Workshop 2022." I masked off the border with yellow Frog tape, & ink blended the center with Saltwater Taffy, Worn Lipstick, & Abandoned Coral Distress inks. I used the "Gracious Leaves" embossing folder from Memory Box to emboss the panel.

I heat embossed the greeting, from Simon Says Stamp's "Holiday Greetings Mix 1" stamp set, with gold onto a scrap of patterned paper I had in my stash. I cut that into a strip & added a narrow strip of matte gold foil cardstock along the bottom. I adhered that to my embossed panel. Finally, I added my panel to a Simon Says Stamp Fog cardstock mat that I'd adhered to a white A2-size card base.

I'm also entering this card in Through the Craft Room Door's "Anything Goes" challenge.

Snowy Season's Greetings

This is my second card for Christmas Card Throwdown's October Tic-Tac-Toe Challenge. For this one I chose the diagonal row of Favorite Color (purple), Patterned Paper, & Die Cut.

I used the remainder of the same "failed" alcohol ink background from my first card for this challenge to die cut the snowflakes. As Jennifer McGuire says, if you do a background you don't like, just die cut from it! 😊 I cut a panel of pink patterned paper from an old 6x6" pad from BoBunny, & matted it with navy cardstock, to complement the dark blue snowflakes. I glued my snowflakes to that.

I die cut a label with one of the "Grommet Tags" set by Spellbinders (discontinued) from yellow cardstock, & heat embossed my greeting with navy embossing powder. The greeting comes from Hero Arts' "Holiday Cardinal" stamp set. I adhered 3 purple strips - scraps from an ink smooshed technique piece I'd done previously - to my pink panel. I then adhered my greeting label over those. As a finishing touch, I colored 2 clear gems with a navy Sharpie marker, and glued them over the holes in the ends of the label.

I'm also entering this card in Hero Arts' "Stay Crafty with a Blog Named Hero" October challenge: "Merry Everything."

Hummingbird Happy Birthday

My counselor's birthday is coming up this weekend, & I made this card for her. The design is based on Sketch Challenge #580 at Try Stampin' on Tuesday. For the main elements, I rotated the sketch 180 degrees. I added the sequins at the bottom right, in place of the banner in the sketch.

I embossed my background panel with the "Vines" embossing folder from Park Lane, then adhered it to my A2-size card base. I stamped the "Hummingbird" image from Divinity Designs onto a scrap of 140 lb. watercolor paper, using Ink on 3's Fade-Out ink. I painted that with my watercolors. I used a black glaze pen to go over the eye, & added in the catchlights with a white gel pen.

I printed the flower from Fred She Said's "Hummingbird & Columbine" digital set onto another piece of watercolor paper. I watercolored that as well. I stamped the "happy birthday," from Altenew's "Balloon Bunch" set, with Villainous Potion Distress Oxide ink. I felt that went well with the purple I'd used in the bird.

I adhered my flower panel to my card. I die cut the hummingbird with the coordinating die, & also die cut it 3 more times from white cardstock. I layered all the die cuts, & then glued it onto my card. I added 3 5mm Crystal sequins from Darice onto the bottom right, & that finished this card. I really love how this came together, & I'm sure my counselor will love it, too.

Joy to the World

The current challenge at Christmas Card Throwdown is a Tic-Tac-Toe Stash challenge. I chose the diagonal line with the Nativity, Patterned paper, & Embossing (heat embossing, in my case) squares.

I had an alcohol ink background that I'd done for a different card, that had not turned out at all as I'd intended. It's been sitting on my desk for a few weeks now, and I finally decided to use it for this card. The blue alcohol inks had gotten rather dark in places, & I was concerned my image wouldn't show up well. So I spritzed the panel with isopropyl alcohol & daubed it with a paper towel to remove some of the ink. To my delight, it worked really well! I then heat embossed one of the images from Sweet 'n Sassy Stamps' "O Holy Night" stamp set with Wow Perissa embossing powder. I had to be very careful with the heat embossing, since my background is Yupo paper, which is rather sensitive to heat. Thankfully, I was able to melt the embossing powder without warping the paper too much. After the embossing had cooled, I die cut it with a circle die. I cut another circle from white cardstock, & adhered my Yupo circle to that, just to provide more stability & flatten it.

I used the "Big Rays" stencil from A Colorful Life Designs to stencil my background. I inked with Fossilized Amber Distress ink onto a light yellow cardstock. When I removed the stencil, I felt the contrast between the inked & uninked areas was a bit too stark, though. So I blended over the whole panel with just the ink that was left on my blending foam. That knocked the contrast back by darkening between the rays slightly. Then I die cut the panel with the stitched rectangle from Mama Elephant's "Femme Frames" set (discontinued).

After I glued my focal circle in place, I stamped my greeting (from the same set) in Lawn Fawn's Blue Jay ink. I cut a panel of patterned paper from Graphic45's "Christmas Carol" 6x6" pad with the largest of the "Large Stitched Rectangle" dies from Lawn Fawn. I used that to mat my main panel, & then adhered it to a white card base.

I'm also entering this card in Double Trouble's "Let's Get A-Round to It" challenge.