Shoot for the Moon

I decided to create another card for A Blog Named Hero's "One Layer" challenge. The woman I send cards to for Send a Smile 4 Kids is desperate for boy cards, so I figured this one would work for that! I decided to create a galaxy background, so I used 140 lb. watercolor paper.

I used Hero Arts' "Shoot for the Moon" stamp set. I began by die cutting 2 circles from masking paper using the "Standard Circles LG" & "Standard Circles SM" die sets from Spellbinders. After I determined where everything would go, I stamped Saturn with Colorbox Putty archival dye ink. I colored it with my Inktense pencils, using a damp paintbrush to pick up the color & apply it to the paper. I then stamped it again with Versamark ink, & clear heat embossed it to seal in the color.

To create the moon & Earth, I placed the negative of my circle masks on my card panel. I used an ink dauber to blend a light coat of Scattered Straw Distress ink onto the larger opening (for the moon), and then made "craters" with Stormy Sky Distress ink. I used another dauber to ink over the whole thing with Lawn Fawn Yeti pigment ink. The yellow & blue areas show through, but it's still subtle. Finally, I stamped my greeting with Versafine Onyx Black ink. For Earth, I blended Broken China Distress ink through my mask, then colored a rough estimation of continents with a green Tombow marker.

For the background, I first masked off my moon & Earth with the masks I'd die cut. I inked over the whole background with Distress inks in Picked Raspberry, Mustard Seed, & Mermaid Lagoon. When it looked like a hot mess, I knew it was time to add the black! :) I inked over the whole panel with Black Soot Distress ink. This is always kind of scary, because the risk of ruining your whole panel is there. But I think this actually came out to be the best I've ever done! After I'd finished inking, I spattered 2 colors of Gansai Tambi Starry Colors over the panel for stars.

I removed the masks, and replaced the negative masking pieces. I inked Earth & the moon with Versamark, and clear heat embossed them, so they would match Saturn. Finally, I removed my masks & adhered my panel to a white A2 card base.

I'm also entering this card in 613 Avenue Create's Challenge #201: "Anything Goes."

Masculine Birthday Card

The woman I send cards to for Send a Smile 4 Kids has mentioned a couple of times recently that she needs boy cards desperately. So I have been working to make some for my next shipment. This is one that was inspired by the "One Layer" challenge at A Blog Named Hero.

I remembered a lesson in the "Stenciled" class from Online Card Classes that I took ages ago. Jennifer McGuire demonstrated turning the "V-Pattern Mask" from Studio Calico (discontinued) into a diamond design. So I decided to combine that technique with the "LOL" stamp set from Hero Arts to create this one-layer birthday card.

I first stamped the phone from "LOL" in Versafine Onyx Black ink in the center of an A2-size panel of white cardstock. I also went ahead & stamped the greetings in Hero Arts Lime Green & Navy inks. I stamped the little hand icon with Hero Arts Stone Wash ink, & the 2 smiley face emojis with Simon Says Stamp Sunshine ink. The green & yellow inks kind of mooshed on the paper when they dried, so I ended up going over the letters in the greeting and the eyes & mouths on the smiley faces with a white gel pen. Finally, I masked off that area.

For my background, I used Twisted Citron, Mowed Lawn, Lucky Clover, Evergreen Bough, Broken China, Peacock Feathers, Mermaid Lagoon, & Blueprint Sketch Distress inks. I taped my stencil over my panel, and masked off on either side of one of the chevrons. I inked that, moved my masks, inked with the next color, & so on. The Blueprint Sketch ended up being too warm a blue, though, so I inked over that also with Mermaid Lagoon. Finally, I flipped the stencil around & went back the other way with the same colors.

I removed my mask, & drew 2 black lines along either side of the inked diamond pattern. All that was left then was to adhere my panel to a white A2 card base.

I'm also entering this card in the following challenges:

613 Avenue Create #201: "Anything Goes"
Pile It On #134: "Feathers/Scales and/or No Patterned Paper" (obviously, the latter category)

Joy Pop Up Box Card

This is my 3rd entry for My Favorite Things' "2017 Card Design Superstar" challenge. I'm entering this in the "Innovation Master" category.

I decided to make a pop-up box card for this challenge. I have a hit-or-miss track record with this type of card, but I keep trying to perfect my technique! I think I did fairly well with this one, if I do say so myself! :)

I created the box from 140 lb. watercolor paper, following the instructions in this post, and the measurements from a different post. After cutting & scoring the paper, I sprayed it with Dylusions London Blue & Vibrant Turquoise; Luminarte Radiant Rain Shimmering Mist; & Heidi Swapp Teal Color Shine mist. Since I was using snowflakes, I just wanted a variety of blues to go with the "cold" theme. I dried that with my heat tool, and repeated the process with the insert pieces. Once everything was dry, I used Dylusions White Linen mist to flick speckles on both sides of the main box piece, to mimic snowflakes.

After I assembled the box, I glued in the insert pieces. Then it was time to work on the decorations. I stamped the 3 smaller snowflakes from My Favorite Things' "Sophisticated Snowflake" set (apparently discontinued) in Versamark onto Essentials by Ellen 40 lb. vellum. I heat embossed with Recollections Snow embossing powder, and fussy cut them out. I used a tiny piece of Scor Tape to attach a 1/4" wide strip of acetate to the back of each snowflake, hiding the adhesive behind the embossing.

I applied more Scor Tape to the bottom of each acetate strip, and adhered my snowflakes to the inserts in the box. I also adhered a few to the back of the front panel of the box itself. They were a bit too floppy, so I used tweezers to add another tiny piece of tape further up the strip, and adhered each strip in those spots to the insert/box panel.

Side view of box, showing the stamped snowflake panel

For the side panels, I cut pieces of white cardstock so there would be a 1/8" border all around when I adhered them to the box flaps. I stamped them with the same snowflakes, using Hero Arts Soft Pool and Memento Teal Zeal inks. I used both first & second generation stamping with the Teal Zeal.

I used one of the "Stitched Scallop Basic Edges" dies from My Favorite Things to die cut the top & bottom of my greeting panel. I stamped the "Joy" from "Joyous Christmas Sentiments" (also from MFT, but discontinued) in Memento Danube Blue ink in the center of the panel. I then used Hero Arts Pastel Blue ink to stamp a snowflake over the greeting, to add some interest but still not compete with the greeting. Finally, I adhered that & my 2 side stamped panels to the box flaps.

I really like how this came out overall. My only regret is that I didn't stagger the heights of the snowflakes more. But hey--live & learn, right? I hope whoever gets this card will get a kick out of it!

Butterfly Sympathy

I recently found out through a Facebook group I'm in that a lineman was killed in Victoria, TX, while working to restore power to the residents there after Hurricane Harvey went through. The group member who posted included his grandmother's name & address, so I made this sympathy card to send to her.

I began by cutting a panel of Strathmore Smooth Bristol paper to 4.25x5.5". I marked the vertical center of the panel, and adhered a mask that I'd die cut from a full-sticky Post It note using one of the "Flutter of Butterflies - Solid" dies from My Favorite Things. I also cut a piece of copy paper to the same size as my panel, and tore an oval shape from the area that corresponded with where the butterfly was on my panel. I used repositionable adhesive to stick that mask to my panel, and stamped through the opening with My Favorite Things' "Romantic Script Background" stamp, inked with Pumice Stone Distress ink. Before removing either mask, I also lightly inked inside the oval with Pumice Stone.

For the greeting, I pulled one from My Favorite Things' "Get Well Wishes" (discountinued). I stamped that with Hero Arts Wet Cement ink, centered on my panel below the butterfly area.

To give the panel a more finished look, I marked on the back 1/8" from each side at the corners. Then I used my scoring board & a stylus to score a frame 1/8" in, just to those marks at the corners. I also felt there was a bit of a disconnect between the image area & the greeting. So I colored various size dots with a Tombow marker, and covered each with Morning Dew Nuvo Crystal Drops. That gave the perfect finishing touch!

I'm entering this card in the following challenges:

My Favorite Things' 2017 Card Design Superstar Contest: "Clean & Simple Genius" category
Simon Says Stamp's Wednesday Challenge: "Clean and Simple"
613 Avenue Create #201: "Anything Goes"

Sunny Thoughts

My Favorite Things is having their third annual "Card Design Superstar" challenge. I created this card for their "Coloring Virtuoso" category.

I cut a panel of Strathmore Mixed Media paper to 4.25x5.5". I stamped the little girl from My Favorite Things' "Sunny Thoughts" set (sadly discontinued) in Hero Arts Charcoal ink onto my panel. I went ahead & masked her off so I could work on my background before I spent a lot of time coloring. That way, if the background went awry, I wouldn't have "wasted" my coloring time! :)

For the sky, I used the "Mini Cloud Edges" stencil and Stormy Sky Distress ink. I started towards the top of my panel with the inking, then gradually moved down, using different portions of the stencil so all my clouds didn't look identical. I did leave a bit of a gap in the inking towards the left side. I used painter's tape to mask off a section there, & inked a sun ray with Squeezed Lemonade & Mustard Seed Distress inks. I moved my tape, inked the next ray, and repeated one more time. I made sure the rays got down to the girl's umbrella.

I ink blended Shabby Shutters & Peeled Paint Distress inks for the foreground and middle ground. I decided to put a hedge of sorts behind the girl, so I made that a bit darker. I made quick strokes for grass blades with a green Inktense pencil, then went over them with a damp paintbrush, just to "set" the color. (Inktense pencils become permanent after water has been applied & dried.) I also added variation into the hedge with a couple other green Inktense pencils, using a water brush to pick up the color & apply it in a mottled fashion to my inked area, just to add some texture.

Finally, it was time to remove my mask & color the little girl. I used my Inktense pencils for that as well, picking up the color from the pencils with a damp paintbrush & applying it to the paper. (This is my preferred method for these pencils, since it gives me more control & I get get softer colors.) For her face, I wet the paper first with clean water, then dropped the color in, to get a smoother blend. On the white bands of the umbrella, I actually went in with a light, gradated wash of yellow, to make it look like the sun rays are shining through the material. After I had finished coloring her, I let the paper dry completely & added more grass blades in front of her boots. I set that color with a damp paintbrush to finish.

After letting the panel dry for several hours, I stamped a greeting from "Sunny Thoughts" in Versamark ink over the hedge portion. I heat embossed that with Recollections Snow embossing powder. I let that cool, then adhered my card front to a white A2 card base.

Thoughts and Prayers

We were in need of another sympathy card. I created this one using Hero Arts' "Prayers" stamp set & Spellbinders' "Feathers" dies.

I began with the feathers. I had seen this card on Pinterest, and liked the verdigris look on the feathers, so I decided to recreate that with ink. After die cutting the feathers from 140 lb. watercolor paper, I embossed them with the same dies. I smooshed Peacock Feathers, Evergreen Bough, & Lucky Clover Distress inks onto my non-stick craft mat, and spritzed each with a little water. I dipped each feather in the pools of ink, letting the colors mix on the paper. I added some Delicata Golden Glitz pigment ink to my mat, spritzed it with water, & dipped my feathers in that after the green inks had mostly dried. Then I set them aside to dry completely.

For the background, I first determined how much space I needed for my greeting. I marked that with a pencil, and lightly spritzed my cardstock with water, to soften the fibers, so it wouldn't crack. I lined up the bottom edge of the "Woven" 3D embossing folder from Sizzix with my pencil line, & ran that through my die cutting machine.

I stamped my greeting in Versamark ink, & heat embossed with Ranger Super Fine Detail Gold embossing powder. Once that had cooled, I stretched 3 pieces of jute twine across my card panel, to hide the "line" where the embossing ended, and set off my greeting better. I taped the ends to the back of my panel, and knotted another piece of twine around them. I tied more twine around my feathers, and adhered them to my card front with glue dots at the top of the bunch, letting the bottom ends pop up a bit. Finally, I mounted my card front to a white A2 card base.

I'm entering this card in the following challenges:

Simon Says Stamp's Wednesday Challenge: "Stamp It"
613 Avenue Create #201: "Anything Goes"
Pile It On #134: "Feathers and/or Scales"

Comfort & Peace

The brother-in-law of a friend of my mom's was recently killed in a motorcycle accident. Mama asked me to make a sympathy card to send to her friend.

I used the sketch from the current Fusion Card Challenge for my design:

I began with my focal area and worked out. I die cut a doily from ivory cardstock using the larger of My Favorite Things' "Decorative Doily Duo" (discontinued). I also cut several flower pieces from blue & yellow cardstock using 2 of the Spellbinders "Blooms One" dies. I glued the flowers together--3 layers per bloom--applying liquid glue just to the centers.

For the background, I cut a piece of patterned paper from Graphic 45's "Trousseau" 6x6" pad for the left side, and adhered it to an A2-size panel of navy cardstock.

I stamped a greeting from Avery Elle's "With Sympathy" set onto a strip of tan cardstock with Versafine Onyx Black ink, and cut the right end at an angle. After adhering the doily to the card front, I glued down my greeting strip & flowers, tucking the left end of the strip under the larger flower. Finally, I mounted the card front to a white A2 card base.

I'm also entering my card in the following challenges:

Dies R Us #80: "Die Cut Handmade Flowers"
Simon Says Stamp's Wednesday Challenge: "Stamp It"
613 Avenue Create: "Anything Goes"