Saturday, October 31, 2015

Hello, Beautiful


The "Stay Centered" challenge for "Hope You Can Cling To" is all about using just the center of your card front for your image and/or greeting. I used Our Daily Bread Designs' "Poppy Single" stamp, along with a greeting from Simon Says Stamp's "Summer Garden" for my card.

I first cut a panel of Strathmore Mixed Media paper to 4.25x5.5". I die cut an oval from the center using the smallest of Spellbinders' "Grand Ovals" dies, then embossed it with the "Berry Swirls" embossing folder by Sizzix. I then traced the oval onto another panel of Mixed Media paper, also cut to A2 size, as a guide for my stamping.

I ended up having to cut the greeting stamp in two to make it work for my design. After laying my stamps out on my panel, I stamped the poppy with my MISTI. I made sure to have the stem extend slightly outside the oval, to ground it. I then repositioned my greeting stamps, and stamped them, also using my MISTI, to get perfect placement. I used Versafine Onyx Black ink for my stamping, and heat embossed with Recollections Clear Detail embossing powder.

I used my Inktense pencils to color the poppy. I had found photos online of pink poppies, so I used those as reference. Once I had colored the flower, I was ready to assemble my card. I applied foam tape liberally to the back of my embossed panel, and after erasing my pencil line on my image panel, I adhered the frame in place. Finally, I mounted the card front to a white A2 card base.

I'm also entering this card in the following challenges:

Our Daily Bread Designs "Double Embossing" (heat & dry)
Live Love Cards October challenge: "White Space"

Hang in There, Friend


Another of the challenges for Splitcoast Stampers' "Hope You Can Cling To" card drive is "No Extra Postage." Basically, create an easy-to-mail card--relatively flat--that would require no extra postage to mail. Mine is a shameless CASE of a card Laura Bassen did for a lesson in Online Card Classes' "Stretch Your Stamps 2" class.

I cut a piece of white cardstock to 4.25x5.5". For the greeting, I used 2 different stamps: Technique Tuesday's "Hello Friend," & part of one from the "Up and Away" set by Mama Elephant. I cut the "hello" off the first one, and masked off the remaining border around the word "friend." After inking it up with Versafine Onyx Black, I removed the masks & stamped it in the lower right corner of my panel. Then I masked off the first part of the Mama Elephant greeting, and stamped "hang in there," again in Versafine.

Once the greeting had dried, I stamped the design on the upper part of my card. I drew a line across the panel, above the greeting, and one down the vertical center, to help me place my stamping. I used one of the stamps from Avery Elle's "Rounded Diamonds" set. I began at the bottom, using Hero Arts Fresh Peach ink. I stamped the first motif in the center, then worked out from there, using my horizontal pencil line as a guide. After that, all I had to do was line the stamps up in relation to what I'd already stamped. Easy peasy, lemon squeezy! I used all Hero Arts shadow inks to finish my rainbow pattern: Orange Soda, Lemon Yellow, Green Hills, & Cornflower.

To finish off the card, I cut a .25x5.5" wide strip of black paper, and glued it below my bottom row of stamping. I also added 3 small flower brads (from my stash) around the greeting. Then I just mounted the completed card front to a white A2 card base. This is definitely one of my more CAS cards!

Friday, October 30, 2015

A Little Something


Another card, another challenge theme for "Hope You Can Cling To"! This time, it's "I Believe in Prayers, Love, & Fairy Dust." The challenge is to use a spunky fairy image in our design. I was afraid I was going to have to bow out of this challenge, though, because I have exactly zero fairy images in my collection. It just is SO not my thing. Thankfully, another Splitcoast Stampers member mentioned in a comment on the "Fairy Dust" forum thread that you can find free fairy coloring book images to download. She provided a link for a Google search results page, so that's where I found this image!

I chose Operation Write Home's Sketch #177 for my design:


I sized my image in Photoshop, added a greeting from Sweet 'n Sassy Stamps, and printed it onto a piece of Strathmore Mixed Media paper. I colored her in with Inktense pencils, giving the fairy a Hispanic complexion. It just seemed to go with her overall look. When the color was dry, I went over her wings with my clear Wink of Stella glitter brush pen, to add a bit of sparkle & shimmer.

I chose 3 patterned papers from the "Paddywack" 6x6" paper pad by Recollections. After cutting them to size, I matted the background & the 2x4" strip with a light yellow-green cardstock. I used Twisted Citron Distress ink to ink the edges of the focal panel, and heat embossed that with Ranger Holographic embossing powder. Just a little more fairy dust on my card!

After I had adhered my background & the banner to my white A2 card base, I measured & marked where I wanted my brads to go. I coated each brad in Versamark ink, then dipped it in the Holographic embossing powder. After melting the powder with my heat tool, I dipped the brad in the jar of powder again before the melted powder had cooled. I hit that with my heat tool, and let it cool. Even more fairy dust! :) I inserted the brads into the 2x4" panel, and adhered it to the background. I popped my focal panel up with foam tape, and this card was done!

Hang in There


The challenge theme for October 10, in this year's "Hope You Can Cling To" card drive at Splitcoast Stampers, is "Tag, You're It!" Obviously, the challenge is to make a card using a tag. I thought this cute little bunny flying with his balloons, along with the greeting, were perfect for this design.

I die cut my tag from patterned blue cardstock (by Momenta) with the "Stitched Duo 3" tag die from Pretty Pink Posh. I also die cut a hole reinforcer from white cardstock using one of the dies from Mama Elephant's "Tags a Lot" set. I glued that in place on the tag, and when the glue had dried, punched through the hole with my 1/8" hole punch. I threaded several plies of white crochet thread through the hole, and knotted them. Then I set that aside while I worked on the other elements.

I stamped the bunny & balloons, from "In My Heart" by Mama Elephant, on a scrap of Strathmore Mixed Media paper. I used Versamark for the balloons, and heat embossed them with Ranger Super Fine Detail White embossing powder. For the bunny, I used Ranger Archival Watering Can ink. I colored them both with my Inktense pencils, then die cut them with the coordinating dies.

I positioned the bunny on my tag, without gluing him down, just to get an idea of where to stamp the balloon strings. (The die cuts only the balloons, not the strings.) I stamped the balloon strings directly on the tag with Hero Arts Unicorn white pigment ink. I felt the first stamping wasn't clear enough, so I double-stamped them. Thankfully, I used my MISTI, so there was no problem getting the second stamping in exactly the right position! Finally, I glued down the bunny & balloons.

I stamped a greeting from the same Mama Elephant set in Watering Can on a scrap of pale pink cardstock, and cut it into a strip. The gap to the left of the second line bothered me, so I took the small heart from Simon Says Stamp's "Sending Happy Thoughts" stamp set, and stamped it 3 times in Stampabilities Light Pink pigment ink.

For the background, I die cut a piece of pink cardstock with the largest of Lawn Fawn's "Large Stitched Rectangle" dies. I adhered my tag with foam adhesive, and adhered the greeting, placing a piece of foam tape under the left end and glue on the right side, so it would be level with the tag. I finished my card by mounting the front panel to a white A2 card base. Another card for someone to give a cancer patient at MD Anderson Cancer Center!

Thursday, October 29, 2015

If You Need a Hug


The "Hope You Can Cling To" challenge theme for October 27th (2015) is "Strength in Numbers." I must admit, when I first saw the title, I assumed this would be about using numbers on a card. Well, you know what they say about people who assume things. ;) When I read the description, actual numbers are not involved. Instead, the challenge is to use masking to create a group (number) of people or critters as the focal point of your card. Ahhh--numbers! :)

I chose to use the "In My Heart" stamp set by Mama Elephant. Now, this set does come with matching dies, which I have. But you can't really use dies to create good masks, at least not for something like this, since they cut larger than the image itself. So I stamped each of the children on scraps of masking paper, "laminated" them with packing tape to make them more easily reusable, and fussy cut all five of them out.

For the focal panel, I die cut a piece of Strathmore Mixed Media paper with the largest of Lawn Fawn's "Small Stitched Rectangle" dies. I traced around that on a piece of scratch paper, so I could do a "test run" on my stamping. I didn't bother with the masks at this point; I just wanted to get a sense of where each child would go on my panel. After I did that, I stamped the children on my panel, using Ranger Archival Jet Black ink & masking as I went. I then colored them with Inktense pencils.

I'm still experimenting with what colors to use for different skin tones. One thing I find as a minor annoyance is how it seems so many card makers default to doing only Caucasian skin tones. It frustrates me, because I (and others) then have no reference for what colors in different mediums to use for other ethnicities. So I decided just to forge ahead on my own. Like I said, I'm still working out the kinks. But I think, in this card, I got a pretty good approximation of African & Hispanic skin, as well as Caucasian.

Anyway, back to the card. After I'd finished coloring the children, I masked off the edges of my panel outside the faux stitching, and the sky area, and blended Distress inks in Twisted Citron & Mowed Lawn along the bottom for grass. I then masked off the grass area, and used Tumbled Glass, Broken China, Peacock Feathers, and a touch of Mermaid Lagoon Distress inks to create a sky. Finally, I removed all my masking, and stamped the greeting (from the same set) in Jet Black. I also went over the children's eyes with a black gel pen, and the buttons on their clothes with a white gel pen, just to make them pop more.

For the mat, I chose to use the same technique I'd done in this card. I used Twisted Citron, Broken China, & Peacock Feathers, blending a bit of each color here & there around the edges of a white 4.25x5.5" cardstock panel. Finally, I adhered the main panel to this mat, and mounted the entire card front to a white A2 card base.

I'm also entering this card in Simon Says Stamp's Wednesday "Anything Goes" challenge.

Ombre Thinking of You


Lori McAree's challenge for Splitcoast Stampers' "Hope You Can Cling To" card drive is called "Light Days." The challenge is to use ombre--a light-to-dark gradient of color--on your card. I used ombre three times on my card: pink to red on the butterflies, light to dark brown on the lattice, and blue-green to yellow-green on the background.

I first inked a piece of white cardstock with Distress inks in Spun Sugar, Worn Lipstick, Abandoned Coral, Barn Door, & Fired Brick. I die cut several butterflies from that panel, using the "Butterflies" dies by My Favorite Things. My idea was to have the butterflies going up the background panel, from a darker red color at the bottom to pink at the top.

For the lattice, I inked white cardstock with Frayed Burlap, Brushed Corduroy, Gathered Twigs, and Walnut Stain Distress inks. I die cut that with Spellbinders' "Grateful Lattice" die, and cut around the edges with my paper trimmer. (This die cuts only the lattice portion. It doesn't cut the piece out completely.) To create my background, I inked a third piece of white cardstock that I'd cut to 4x5.5" with Cracked Pistachio & Twisted Citron Distress inks.

I used drops of Ranger Multi Medium Matte on the back of the lattice piece to glue it to the background. I laid out my butterflies on the panel, until I got a nice arrangement, then glued them down. To create the mat, I inked the left & right edges of yet another piece of white cardstock with the browns, going in the same order as I had for the lattice piece. I glued the main panel to this piece, sat back to enjoy my handiwork--and then had a moment of panic. Where was I going to put a greeting???

I went through my stamp sets, looking for a small greeting. I found the perfect one in Mama Elephant's "In My Heart" set. I stamped it on a piece of white cardstock in Versamark ink, and heat embossed it with Ranger Super Fine Detail White embossing powder. Then I inked over it with Walnut Stain, and cut it into a small banner. I glued it in place, and mounted my finished card front to a white A2 card base.

Wednesday, October 28, 2015

Hugs & Prayers


My mom asked me yesterday if I had any get well cards lying around that I didn't know what to do with. I said no, and asked why. She said that a teacher she works with is in the hospital with pancreatitis, and she wanted to send her a card. I asked her later what kind of card she wanted, and after some prompting from me as far as what kind of styles I could do, she said elegant. So this is what I came up with.

After going through my "greeting" stamp sets, I chose two from Simon Says Stamp: "Prayers" & "Summer Garden." I began by cutting a piece of 140 lb. watercolor paper to 3.75x5". I used my MISTI to help with placing the greeting, and stamped it in Versamark. Then I heat embossed that with Ranger Liquid Platinum embossing powder.

I stamped the 3 flowers from "Summer Garden" around the perimeter of my panel, masking them as I went to make some look like they were behind others. Once I had filled the edges, I colored the flowers in with my Inktense pencils, using a damp paintbrush to pick up color from the pencils and paint in the images. I made sure not to have the same color next to itself as I painted. As you might imagine, stamping and coloring the flowers took the longest of any part of this card!

Once my panel was dry, I matted it with black, leaving a 1/16" border on all sides. For the outer mat, I inked a piece of white cardstock with Squeezed Lemonade, Tattered Rose, & Wild Honey Distress inks, trying to get kind of a blurry randomness in the colors. Finally, I mounted my panel on that piece, and adhered it to a white A2 card base.