Monday, October 19, 2015
Thinking of You
The challenge theme for October 6, in this year's "Hope You Can Cling To" card drive at Splitcoast Stampers, is "Hearts for Hope." Stacy, the challenge hostess, wants participants to use 3 hearts and a touch of red on their cards. I decided to use my 3 hearts to create a flower.
I die cut & embossed my hearts from red cardstock, using the smallest of Little B's "Hearts" dies. I also die cut a piece of cream cardstock with the largest of Lawn Fawn's "Small Stitched Rectangle" dies. I stamped the greeting, from Simon Says Stamp's "Sending Happy Thoughts" set, on the background panel, and heat embossed it with Zing Rouge embossing powder. I then glued my hearts in the upper right corner of that panel.
I decided to add the stem & leaves to my flower with some hand-stitching. I sketched that out with a pencil, then pierced holes along the line. The massive amount of "white space" on the background really bothered me, so I decided to stitch some flourishes as well. I used the "Swirly Doodles" template by Hot off the Press to sketch my flourishes, then pierced the stitching holes for those. Finally, I erased my pencil lines and stitched with green embroidery floss.
For the center of the flower, I pulled out a clear yellow button, and threaded it with the same green floss. I tied the floss into a bow, & glued the button down with some Ranger Multi Medium Matte. I finished my card by matting the panel with some red cardstock, and mounted it to a white A2 card base. This card will be going to MD Anderson Cancer Center in Houston, TX, to bring a little lift to one of their patients.
Sunday, October 18, 2015
You Mean the World to Me
Our Daily Bread Designs has been having a sketch challenge on their blog this week. I created this card based on their sketch:
I chose to use ODBD's "Violet" stamp--one I frankly had forgotten I even had! I came across it in my collection while I was looking for another image to use, and thought it would be even better. I stamped it on a piece of white cardstock, using Hero Arts Soft Leaf ink. Then I colored it in with colored pencils, and die cut it out. I used a "Nesting Scallops" die by Lifestyle Crafts, and the one that cut around the whole image was actually too large for my design. So I used the next smaller size, and did an "outside the box" technique. I made little tick marks where the die would cut across the leaves, and cut through the cardstock with my scissors, around the leaves, to those marks. Then I slipped the cut-out leaf sections over the die, so they would not be cut, and ran it through my die cutting machine. Finally, I erased my pencil marks.
For the greeting, I stamped one from the "Word Labels" set by Sizzix on another piece of white cardstock, using Versafine Onyx Black ink. I stamped the matching border around it in Memento Grape Jelly dye ink, then cut it with the coordinating die. I glued that to a piece of green patterned paper from my scrap stash, and glued half the image circle to the background. (I only glued half, so I could tuck my diagonal strip underneath, then finish gluing the circle.)
I toyed around with a few ideas for what to use for the strip between the image & greeting elements. Finally, I cut a piece of lavender cardstock, and die cut both long edges with one of the "Stitched Borders 1" dies by Pretty Pink Posh. I positioned that diagonally on the card, over the scalloped circles. I cut around two of the leaves a little more, so I could have them lie on top of the strip. I then adhered the strip in place with some ATG adhesive, and cut off the portions that hung over the edges of my panel.
At this point, I was stumped with what to do on the bottom of the panel. I played around with some die cut border strips, but nothing really screamed, "Use ME!" So I walked away and took a break for a while. When I came back, I knew I wanted to use a ribbon. I had some 3/8" wide sheer purple ribbon from Michael's out. I ran a length across the bottom of the panel, and adhered the ends on the back. Then I created a "faux bow," loosely following this tutorial I'd seen on YouTube. This creates a much flatter bow, without the bulky knot you get in the middle if you just tie it normally. Finally, I matted the whole panel with a piece of dark purple cardstock, and mounted that to a white A2 card base. I will be sending this with my cards for MD Anderson Cancer Center, hopefully to help a cancer patient's loved one tell her he loves her!
I'm also entering this card in Virginia's View Challenge #19: "Color It."
You're Always in My Heart
The challenge posted on October 5, for this year's "Hope You Can Cling To" card drive at Splitcoast Stampers, is "Don't Color Between the Lines." The idea is to take an image, and not color it. I've had this loon stamp (source unknown) for a long time. It was hard not to color any of it, especially the water. But I think it still creates a peaceful image.
I stamped the loons on a piece of white cardstock, using Hero Arts Charcoal mid-tone shadow ink. I then die cut & embossed it with a Spellbinders "Classic Ovals SM" die. For the greeting, I chose one from Hero Arts' "You're Always in My Heart" stamp set. I stamped it also on white cardstock in Charcoal ink. I used the "Susan's Labels" template by Hot Off The Press (which I believe is no longer available) to trace the label shape around the greeting, then cut it out with my scissors. I glued both the greeting & loons to a piece of blue-grey cardstock. I wanted the look of a matted print with a title plate. So I inserted a heart mini brad in each end of the greeting label, to "hold" the "title plate." I also punched the corners with an EK Success decorative corner punch.
To finish this simple card, I matted the panel onto a piece of pink cardstock, and rounded the corners with my 3/8" Corner Chomper. I rounded the corners of my white A2 card base as well, and mounted the card front to that.
Saturday, October 17, 2015
Noel
I stamped my moose on a piece of white cardstock, using Memento Tuxedo Black ink. I colored him in with colored pencils, and then masked him off. I inked the background with Broken China, Chipped Sapphire, and a bit of Black Soot Distress inks, then removed the mask. I die cut that with a Spellbinders "Labels Eight" die, and also die cut a frame from green cardstock, with that die plus the next largest.
For the background, I cut a piece of patterned paper from My Mind's Eye's "Cozy Christmas" 6x6" pad to 4.25x5.5". I also cut a piece of vellum the same size. I taped the vellum over the patterned paper, and ran that through my die cutting machine with the larger "Labels Eight" die, to create a window in the panel. After removing the tape, I ran the vellum piece through my Xyron Creative Station, to apply adhesive to the back. Then I adhered that to the patterned paper piece, & mounted the panel to a white A2 card base.
After inlaying my focal panel & frame, it was time to work on the greeting. I used the "Noel" from the "Mistletoe & Holly" stamp set from Essentials by Ellen. I stamped that in the corner, roughly following the line of the frame. Then I heat embossed that with Recollections Copper Detail embossing powder. Finally, I added some stars (or snow) to the sky with a white gel pen.
I'm also entering this card in Virginia's View Challenge #19: "Color It."
Hi, Hot Stuff!
Kathleen Curry's challenge for Splitcoast Stampers' "Hope You Can Cling To" card drive is to "Make It Tasty." She challenged card makers to use food items on their cards. I decided to go with Sweet 'n Sassy Stamps' "Punny Fruits and Veggies." I figure, cancer patients can always use a little punny humor! :) I also used Sketch #SC552 from Splitcoast Stampers for my design.
I began by die cutting a circle from some 140 lb. watercolor paper with one of the "Stitched Circles" dies by Simon Says Stamp. I taped the die cut in the negative space, so I could put it in my MISTI to stamp the pepper onto it. I used Versafine Onyx Black ink to stamp the image, and colored it with my Inktense pencils, using a damp brush to blend the colors. I also created a mask for the pepper from some masking paper, and when the coloring was dry, masked off the pepper. I chose Tumbled Glass Distress ink to blend on the background, just to give some contrast to the hot red pepper.
I used 3 patterned papers from my scrap stash for the card layers. I adhered them to a piece of burgundy cardstock, which I chose to play off the red of the pepper. I stamped my greeting, also from "Punny Fruits & Veggies," on another piece of the same cardstock, and heat embossed it with Ranger Super Fine Detail White embossing powder. I cut that into a banner shape, then adhered it & my focal piece to the card front. For the mat, I inked around the edges of a white A2 card base with Tumbled Glass, and, when the ink had dried, adhered my card front to that. And that finished this card. Hopefully, a patient at MD Anderson Cancer Center will get a kick out of it!
I'm also entering this card in the following challenges:
Virginia's View Challenge #19: Color It
Craft Your Passion Challenges #283: Anything Goes
Through the Craft Room Door: Anything Goes
Friday, October 16, 2015
Hello Mosaic
Another of the challenges for the "Hope You Can Cling To" card drive at Splitcoast Stampers is "Mosaic Memories." Kerry Urbatch, the challenge hostess, describes the memories that make up our lives as a mosaic. This mosaic helps make us who we are. She challenged participants to google "mosaic tiles," and find an image for inspiration to create a card.
| Inspiration image |
I first inked a panel of white cardstock with Old Paper Distress ink, to get a "grout" look. Then I die cut an oval out of the center, using the largest of Spellbinders' "Classic Ovals LG" dies. I cut several little "tiles" of blue, green, & lavender cardstock with my paper trimmer. I used liquid glue to adhere the tiles in place on my frame. Finally, I trimmed an additional 1/8" off each side, to even out the edges. I also used the oval die to cut from the center again, to trim off the tile pieces that hung over the inner edge.
For the center piece, I die cut another oval using the largest "Classic Ovals SM" die by Spellbinders, and inked it with Old Paper. I cut strips of darker cardstock with my trimmer, but this time cut irregular shapes from those strips with my scissors. I glued them to the oval, then cut off the overhanging portions. I adhered that oval to the positive oval piece I'd cut out from my frame, so the tile pieces in the center had a bit of "grout" between them and the outer (frame) pieces. Finally, I matted the frame with a piece of navy cardstock, and glued my oval into the center.
I die cut Lawn Fawn's "Scripty Hello" from cream cardstock 3 times, and glued them one on top of the other, to create a thick greeting. The background was a bit too busy, and "fought" with the greeting. So I cut a strip of vellum, and glued my die cut to that with small dots of Ranger Multi Medium Matte. I applied more Multi Medium to the back of the vellum, behind the greeting, and finally wrapped the ends around the background panel and adhered them. I matted the panel with a pink parchment paper, and mounted it to a white A2 card base. I will be sending this card on to MD Anderson Cancer Center. Hopefully, it will "speak" to a patient there, and let him/her know s/he is not alone!
Tuesday, October 13, 2015
You are my Heroine
Another of the challenge themes in Splitcoast Stampers' "Hope You Can Cling To" card drive is "I am a Warrior." The prompt is to use some sort of imagery that represents a warrior attitude towards fighting cancer. One of the suggestions was Native American imagery. With that as my inspiration, I decided to use the "Mini Navajo" stencil by The Crafter's Workshop for my background. I also had seen somewhere an example of slightly altering the "you are my hero" stamp in Mama Elephant's "In My Heart" stamp set. The card maker (I have no recollection who she was) added "-ine" to the end of "hero," to tailor it for a female. Since this is Breast Cancer Awareness Month, I decided to borrow this idea with that stamp, so a woman battling breast (or any other) cancer might get encouragement from someone.
For the background, I taped my stencil over a piece of 140 lb. watercolor paper that I'd die cut with the largest of Lawn Fawn's "Small Stitched Rectangle" dies. I chose that paper because I wanted a bit of texture in the panel. Then I took 4 colored pencils--2 blues, a magenta, and a pink--and colored in the design. Once I had everything colored, I removed my stencil. Then I had to figure out how to use this piece in my card!
Continuing with the Native American theme, I went through my animal stamps, and found one of a howling wolf. I decided that might work, but wondered what the Native American symbolism was for the wolf. So I turned to Google. I learned that the wolf can represent wisdom, which kind of worked, but still didn't hit home for me. I noticed the symbolism for a bear was in the same article, so I read further. There was nothing specifically Native American in that article, so I ended up doing another search to narrow it down to Native American symbolism. I found another article with a lot of information. The bear can represent power, courage, and freedom, among other things. I knew I have a small bear stamp (manufacturer unknown), so it was like kismet!
I die cut another piece of watercolor paper with one of Simon Says Stamp's "Stitched Circles" dies, then cut off a part with the same "Small Stitched Rectangle" die, to create a corner in my circle. Then I stamped my bear on that, first in Hero Arts Cup o' Joe ink, using my MISTI. Then, without moving the stamp or paper, I inked the stamp up again with Memento Tuxedo Black, and re-stamped the image. I don't know if the brown really shows through or alters the black in any way, but I figured it doesn't hurt anything! I used a dark brown Zig Clean Color marker to color the rest of the bear, and lightened that color somewhat with my water brush and a clean paper towel. I also painted in some ground for the bear to stand on.
I stamped my greeting in Versafine Onyx Black ink on another scrap of watercolor paper, & added the "-ine" to the end with a black fine-tip Pitt pen. I cut it into a banner, and inked the edges with Chipped Sapphire Distress ink. I also inked the edges of my stenciled panel and the bear piece. Finally, I adhered the focal panel and greeting to my background with foam tape.
For the mat, I wanted a tone-on-tone background. I stamped one of the "On Point Borders," from Mama Elephant, repeatedly on a piece of pink cardstock, using Stampabilities Bright Pink ink. I adhered my completed main panel to that, and finally mounted it to a white A2 card base.
Subscribe to:
Posts (Atom)








