Tuesday, October 13, 2015

Wishing You Joy


Ellen Hutson's October Mix It Up challenge is to combine one or more products from the Essentials by Ellen line with something by WPlus9. I used the "Mondo Magnolia" stamp & dies, along with the "joy" die from WPlus9's "Seasonal Sentiments." A friend of mine has a birthday tomorrow, so I created this birthday card for her.

I stamped the flower in "Mondo Magnolia" on 90 lb. watercolor paper for the largest section, and 140 lb. watercolor paper for the middle & inner sections. (There was no special reason for the 2 different weights of watercolor paper. I just ran out of the 90 lb.) I used Versafine Onyx Black ink for the 2 larger sections, and a combination of Memento Dandelion & Pear Tart dye inks for the center. Then I die cut each section with the coordinating dies. I also die cut 3 pieces of cardstock for each of the middle & inner pieces, so I could adhere them together to pop the sections up slightly when I layered them.

For the outer & middle sections on the flower, I added some subtle shading with Antique Linen Distress ink, applied like watercolor. Then I glued all the pieces together.

I chose 2 patterned papers from my scrap stash. I cut the green woodgrain paper to 4.25x7", and cut the green leaf piece to fit on the bottom, cutting the top edge at an angle. I adhered the leaf piece to the woodgrain, then die cut the "joy" from the panel. I also die cut the "joy" 3 times from dark green cardstock. I glued those 3 together, one on top of the other, then glued the woodgrain die cut that I'd done on top. After matting the background panel with a piece of kraft cardstock, I glued my "joy" die cut in place. I also glued down the magnolia, letting it hang off the card slightly.

To finish the greeting, I created two .5x3" blank "canvases" in Photoshop, then typed the words on those. I printed those onto a scrap of 140 lb. watercolor paper, and cut the strips out. I adhered them to the card front, above & below the "joy." All that was left was to adhere the finished card front to a 4.5x7.25" card base.

Sunday, October 11, 2015

Sorry It's Been "Ruff"


A member of my mom's writing group has not been doing well for a while, and is currently receiving hospice care at home. She "commissioned" me to make a card for the group to sign and send to him. He has a great sense of humor, and likes dogs, so I figured this image by Bugaboo Stamps would be perfect.

I chose a sketch from Splitcoast Stampers for my card design. The sketch was sized for an A2 card, and my mom wanted an A9 (5.5x8.5") card. So I created a blank A9-size "canvas" in Photoshop, and used the shape tool to draw boxes to sketch out my layout, based on the sketch. I added in the image on my canvas as well. When I had the "bones" of my design in place, I printed the sketch onto copy paper, and printed the image only onto a piece of 140 lb. watercolor paper.

I colored the dog with my Inktense pencils, using a damp paintbrush to blend the color and create shading. Then I set that aside to dry while I worked on the rest of the card. I used 2 patterned papers for the background. The paw print one is an old one by The Paper Studio, and the red polka dot paper is from BoBunny's "Pop Quiz" 6x6" paper pad. I adhered those onto a piece of lightweight white cardstock that I'd cut to 5.5x8.5", just to give me a base to work on. I also adhered the focal panel in place. I determined the placement of my brads, then pierced the holes and put in the brads. I added some detail to the dog's cheeks and catch lights to his eyes with a white gel pen. I also applied a coat of clear Wink of Stella glitter to the tag on his collar, and coated his tag & nose with Glossy Accents. Finally, I adhered the completed card front to a white card base.

Thursday, October 8, 2015

Hello


One of the challenges in Splitcoast Stampers' "Hope You Can Cling To" card drive is "Cancer Free." The prompt is to create a card with a free form collage on it. I must admit, when I first saw the words "free form collage," I kind of freaked out. Then I saw an example in the gallery, and it reminded me of a design challenge by May Flaum during this year's Camp Scrap. She called it "one spot," and the basic premise was to take one element and build out from there. She also does a lot of collage-type work, so I tried to channel my inner May Flaum to do this card! :)

I started by die cutting a doily, using an old die by Lifestyle Crafts (I believe long since retired now). I also used some of the stamps in the "Bold Blooms" set, designed by Julie Ebersole for Ellen Hutson. I stamped one of the flowers on white cardstock in Hero Arts Lemon Yellow & Fresh Peach inks. I also stamped two of the leaves on green cardstock using Hero Arts Green Hills. I blended Squeezed Lemonade Distress ink over the peach flower, since I felt the white background was a bit too stark. Then I cut them with the coordinating dies.

It was time to start building my collage. I knew I wanted them to be concentrated in the lower left corner, so I started with the doily and laid the flowers & leaves on top, without adhering anything, until I liked the arrangement. Then came the hard part--remembering where to put everything when I took it apart to apply adhesive! I could have taken a photo with my iPod, but I was lazy and didn't feel like doing that. I ended up getting everything placed pretty much in the original spots anyway! :)

For the greeting, I stamped the "hello" from "Mondo Magnolia," also from Ellen Hutson, in Versafine Onyx Black ink on a piece of cream cardstock. I cut it into a banner shape, and tucked it into my floral arrangement. I left the right end free, and curled it up a bit, just to add a bit of dimension. Once everything was adhered, I used my sewing machine to stitch around the perimeter with black thread. I did not stitch over my collage, though. Finally, I mounted the completed card front to a white A2 card base. I will be sending this to MD Anderson Cancer Center in Houston, TX, as part of the "Hope You Can Cling To" campaign.

Tuesday, October 6, 2015

Love in Any Language


One of the challenges in this year's "Hope You Can Cling To" card drive by Splitcoast Stampers, is "Lend a Hand." Trace your hand & creatively color a card; use your fingers to paint; use an image with a hand prominently displayed. I chose the third option. I immediately thought of the "Love Languages" stamp set by Simon Says Stamp, with its coordinating dies.

I used Operation Write Home's Sketch #247 for my card design:


To begin, I stamped the hand making the sign for "I love you" on cream cardstock, using Stampabilities' Bright Pink dye ink. I then cut it out with the coordinating die. I die cut an oval with one of the "Lacey Ovals" dies by Spellbinders from dark green cardstock, and glued the hand to that. I also stamped one of the hearts from "Love Languages" in Bright Pink on cream, and cut it with its coordinating die.

For the greeting, I stamped one from the set in Versamark on a cream strip, then heat embossed it with Ranger Liquid Platinum embossing powder.

I chose 2 patterned papers for my card. The green chevron is from the My Mind's Eye "Chevron" 6x6" pad, and the arrow paper is from Recollections' "Paddywack" 6x6" pad. I cut them to the sizes in the sketch. I adhered the arrows paper to the chevron, adding a 1/4" border strip from dark green cardstock to the left side of the arrows panel. I matted the whole panel with more dark green. I adhered the greeting strip in place, and glued down the oval above it. Finally, I glued the heart to the oval. All that was left was to mount the finished card front to a white A2 card base. I will be sending this to MD Anderson Cancer Center in Houston, as part of the "Hope You Can Cling To" campaign. Hopefully, it will help a cancer patient's loved one tell them, "I love you!"

I'm also entering this card in Simon Says Stamp's Wednesday "Anything Goes" challenge.

Sending Sunny Thoughts


One of the challenges for Splitcoast Stampers' 2015 "Hope You Can Cling To" series is called "Whatever the Weather." The idea is to take a weather event/pattern that you don't like, and make an encouraging card based on that. While I don't mind rain once in a while, I really prefer sunshine. I have this stamp by My Favorite Things, so I decided to make a card around that.

I stamped the little girl on a piece of 140 lb. watercolor paper, that I'd cut to 4x5.25", using Ranger Archival Jet Black ink. I also stamped one of the greetings from that same set next to her. I colored her in with my Inktense pencils, using a damp brush to blend & provide highlights and shading. For the background, I drew a line for the ground, and colored below that with a Chinese Ink Inktense pencil. I added a puddle with a blue pencil, and then blended everything with my brush. I wet the sky area with clean water and a larger brush, and then painted it with watered-down Hickory Smoke Distress ink. Then I dried the panel with my heat tool.

I stamped the sun from Sweet 'n Sassy Stamps' "Happy Happy" set with Hero Arts Butter Bar ink onto a scrap of watercolor paper. When the ink had dried, I die cut it with the coordinating die, and colored it with a yellow Inktense pencil & a wet brush. I die cut several clouds from grey cardstock & vellum, using the "Clouds and Raindrops" set, also by Sweet 'n Sassy Stamps. I also die cut raindrops from 3 shades of blue shimmer and glitter cardstock. After I determined placement of my elements, I glued the clouds and sun down, then glued the raindrops. I used my scissors to trim off the parts that hung over the edges of the panel.

To add a bit of shimmer & shine, I added some clear Wink of Stella to the umbrella & sun. I also coated the umbrella, boots, and raindrops with Glossy Accents. When that had dried (I gave it several hours, just to be sure), I matted the panel with yellow cardstock, then mounted that to a white A2 card base.

I'm also entering this card in the following challenges:

Simon Says Stamp's Wednesday "Anything Goes"
Virginia's View Challenge #19: "All Things Colored"

Friday, October 2, 2015

Thinking of You

Splitcoast Stampers is having their annual Hope You Can Cling To challenge series & card drive this month. The idea is for crafters to create cards to send to MD Anderson Cancer Center. They can be for family members to give to their loved ones who are battling cancer, or the card maker can write a personal note in the card to send to the patients and their loved ones. This is my first card, for the "Split the Difference" challenge. The idea is to have a full scene, split by a greeting. You can read more about this specific challenge at the "Split the Difference" forum post. More information about the HYCCT campaign can be found on this post.


I used the outline image from the "Floral Jug" digi set from Doodle Pantry for the front of my card. I opened the image in Photoshop, as well as a greeting from the "Marigolds & Morpho" digi set by Fred, She Said. I sized the image to fit on a 4x5.25" panel, and positioned the greeting over it. I enlarged the greeting, and also created a white box to go behind it, to mask the jug. I felt the greeting was "floating" a bit too much, though, so I drew a line above and below it, to frame it and separate it from the jug more. Finally, I printed my composite onto a piece of 140 lb. watercolor paper.

There is a colored image included in the "Floral Jug" set, which I printed off to use as reference. I wanted to put my own spin on the colors, though, rather than just copy the colors the artist used. So I googled calla lily & daisy colors. I found a striking photo of purple and white calla lilies, and a pink daisy. So I printed those for reference as well. I used my Inktense pencils and a damp brush to color the image. When I got to the jug, I masked off the greeting area with low-tack painter's tape, and colored the jug. I was glad to find, when I removed the masking, that none of the color had seeped under the tape, even with all the water I ended up using!

To finish the card, I adhered my watercolor panel onto a lavender mat, and mounted that to a white A2 card base.

I am also entering this card in the following challenges:

Simon Says Stamp's Wednesday "Anything Goes"
Doodle Pantry Ants in My Pantry Challenge #10: "Anything Goes"
Through the Craft Room Door: "Anything Goes"

Just One More Candle


My sister-in-law's birthday was this past Tuesday. We are getting together with her & my brother tomorrow to celebrate. So I've been busy creating cards for her, including this one. This card doubles as card and gift packaging, since there's a tag inside I will attach a gift card to. An extra little surprise! I found this tutorial for a Napkin Fold card on Splitcoast Stampers' website. I figured the engineering would appeal to her scientific/analytical side.

I began by scoring and folding a 12x12" piece of teal cardstock, as per the instructions in the tutorial. I cut the triangles from patterned papers from Carta Bella's "Soak up the Sun" 6x6" pad (ice cream cones); Me & My Big Ideas (polka dots & stripes); and another unknown from my stash (multi-colored squares). I adhered the triangles on their corresponding sections. I did end up having to adjust the measurements from those in the tutorial. In the tutorial, the author used a border punch system to punch the perimeter of the cardstock base, which I didn't do. I don't know if that affected the sizes of the squares you cut the triangles from, but when I cut them according to the provided measurements, some triangles were too small. So I ended up refiguring and cutting those again. Live & learn!

Inside of card
For the images on both the front & inside of the card, I used Penny Black's "Birthday Party" stamp set. One of the traditions in my sister-in-law's family is that, however old you are, that is the number of candles on your birthday cake! So the image of the little mouse with the cake full of candles seemed perfect. The hedgehog on the front is just there for the cute factor! :) I also used the "Just one more candle" stamp from Simon Says Stamp's "Big Birthday Wishes" for the greeting on the inside. I stamped both images & the greeting in Ranger Archival Jet Black ink onto Strathmore Bristol paper. I then colored the images with my Zig Clean Color markers, using a damp brush for shading & highlights.

When I had finished coloring, I die cut the panels with a Spellbinders "Labels One" die. I also die cut a piece of green cardstock with a "Scalloped Labels One" die by Spellbinders. For the yellow polka dot frame on the inside, I used a larger "Scalloped Labels One" die to cut an opening from the center of my panel. After inking the edges of the focal panels with Mustard Seed Distress ink, I adhered them to the green scalloped mats. For the inside, I applied thin strips of foam tape on 3 sides of the panel, then adhered it in place. (Leaving the fourth side open gives me a place to slide in the tag.) I cut a tag from orange cardstock, created a hole reinforcer with the smallest of Simon Says Stamp's "Stitched Circles" dies, punched a hole, and threaded some fibers through.

For the belly band, I cut a piece of green cardstock and punched the 2 long sides with a Fiskars border punch (exact name unknown). I adhered a length of rose-colored ribbon to that, and adhered a piece of yellow polka dot paper over the ribbon. I used my ATG gun to adhere one half of the band to the center back of the card. You then just wrap the rest of the band around the card and tie the ribbon to keep the card shut. Once I had that in place, I adhered the front image panel to the band with some foam tape.